Product introduction
Summary
Aflatoxins are toxic and carcinogenic. They are metabolites of the fungi Aspergillus flavus and Aspergillus parasiticus. There are four principle types of aflatoxin: B1, B2, G1 and G2, which are named for their respective innate fluorescent properties. Aflatoxin B1 is the most frequently encountered of the group and the most toxic one. Aflatoxins can be found mainly in milk, cereals, nuts, cottonseed and human blood.
Aflatoxin B1 is a potent human carcinogen and may contribute to human liver cancer.
Intended Use
The Aflatoxin B1 ELISA Test Kit is a competitive ELISA for the qualitative or quantitative analysis of aflatoxin B1 in rice flour, milk etc.
Available Products
| P/N? ? ? ? ? ? ? ? ?? | Sensitivity? ? ? ? ? ? | LOD | Sample |
| SC0003?? | 0.03μg/kg? ? ?? |
| Corn, rice, wheat, beans, peanuts, peanut butter, edible oil, and a variety of food and feed |
| SC0005? ? ? | 0.01μg/kg? ? ?? | 0.12μg/kg? ? ? ? ? ? ?? | Formula food/milk for infant (rice flour) |
| SC0021?? | ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? | 1.5μg/kg? ? ? ? ? ? ? ?? | Feed and feed material |
Precautions
1. Reagents should be brought to room temperature, 20–25oC prior to use. Avoid prolonged (> 24 hours) storage at room temperature.
2. Immediately start the next step of operation after the washing procedure, avoid the microwell be dry affecting the detecting result.
3. Shake the reagent before use.
4. The Stop Solution is 2M sulphuric acid. Avoid contact with skin and mucous membranes. Immediately clean up any spills and wash area with copious amounts of water. If contact should occur, immediately flush with copious amounts of water.
5. Do not use reagents after expiration date. Do not substitute reagents from any other manufacturer into the test kit. Do not combine reagents from other Mycotoxin ELISA Kits with different Lot numbers.
6. The kit should be store at the temperature 2-8℃, do not freeze. Be sure to re-seal unused wells in the zip-lock bag with desiccant stored. Avoid directly exposure the reagents to light.
7. Any color conversion indicates that the reagent is deteriorated, please drop it. If the absorbance of negative control absorbance is less than 0.5, the reagent is probably deteriorated.
8. The incubating time is usually 15-20 minutes after dispensing Substrate A and 50μL Substrate B into the wells. If the color too less, please prolong the incubating time but should not exceed 30 minutes. Conversely, reduce the incubating time.
9. Crystallization of the Concentrated Wash buffer is a normal phenomenon, heat it before using.
10. The optimum reaction temperature is 25℃, too high or two low temperature would arise the change of the absorbance and sensitivity.
More Products
